You have no items in your shopping cart.
You have no items in your shopping cart.
The Low-Profile Single-Track Bypass Barn Door Hardware kit is great for tight spaces where there is limited space above the doorway. With a single track, the bypassing door is held in front of the inner door by Z-shaped hangers, which allow the doors to be "stacked" when in the open position. The hangers overlap so both doors are always kept together with some overlap between them. Perfect for the bathroom, bedroom, den, closet, pantry or laundry room.
Ships within 2 business days. Courier shipping with UPS takes 3-4 business days depending on location. Rate is $24 per kit.
Single-Track Bypass Barn Door Hardware Kit Components
|Name||Flat Track||Steel Hanger||Door Stopper||Spacer||Lag Bolt||Washer||Floor Guide||Anti-Jump Pad||Hex Wrench||Junction Plate||Installation Manual|
Q: What length of a track should I order?
A: This is dependent on the amount of clearance you have on at least one side of your doorway. If you want to be able to access your entire doorway, then it is recommended that you order a hardware kit that is twice as long as the combined width of your doors. For example if you are installing a single 4’ door, you will want to order a hardware kit with an 8’ track. If you are mounting two 3’ doors, then you will want to order a 12’ track ((3’ + 3’) x 2 = 12’). If you don’t have the necessary clearance for both doors, then you may want to consider one of our Bypass Barn Door Hardware Kits. You can browse our selection of bypass kits HERE.
Q: How much extra track length do I need in order to accommodate the door stops? For example: if I need a 6’ track, should I order the 6’ 7” hardware kit so that my doors will go right to the 6’ mark?
A: You do not have to accommodate for the doors stops. The door stops are typically installed several inches in from the end of the track, but the door hangers are also installed several inches in from each side of the door. So when your door is in the open position, the edge of the door will be flush with the edge of the track. Order the length of track you will require for your installation. If you need a 6’ track, then order a 6’ track.
Q: How far apart are the pre-drilled spacer holes?
A: That is dependent on the length of the track in the hardware kit you are ordering. See page 10 of the installation manual for the spacer hole distances. The installation manual can be found HERE. If the distance between the spacer holes doesn’t match the distance between the studs in your wall, then it is recommended that you first mount a header board to your studs and then mount the hardware kit to your header board. Mounting a header board is always recommended as it adds greater stability to your barn door installation.
Q: What is the distance from the wall to the outside of the door?
A: The distance from the wall to the outside the door is 2-1/4”.
Q: What is the distance from the wall to the inside of the door?
A: The distance from the wall to the inside of the door can be calculated using the following formula: (2-1/4") - (thickness of door). For example, if your door is 1-1/2" thick then you will apply the following formula: (2-1/4") - (1-1/2") = 3/4". In this example the distance between the wall and the inside of your inner door is 3/4".
Q: What thickness of doors can the harware kit accommodate?
A: The kit is designed for doors between 1-3/8” to 1-3/4” thick. If your doors are less than 1-3/8” thick or greater than 1-3/4”, then you will require shorter or longer hex bolts to mount the hanger to your door. If the door is greater than 2” thick, then you will require spacer extensions so that the doors can pass each other. The maximum door thickness is 2-1/2”. Spacer extenders and longer/shorter hex bolts can be provided at a surcharge. To order spacer extenders and/or hex bolts click HERE and order the correct option for your door thickness, number of doors and track length. If you have any questions, call us at 1-800-997-5085 or send us an email at firstname.lastname@example.org.
Q: Are the hardware kits available in custom sizes?
A: No, they are only available on the sizes listed on the website. If you require an irregular length, we recommend that you order the next size up and then cut down the track to the length you need. It doesn’t compromise the integrity of the track.
Q: What track lengths do you have available?
A: Our bypass hardware kits are available in the following track lengths: 4', 4' 6", 5', 5' 6", 6', 6' 7", 7', 7' 6", 7' 11", 9', 10', 11', 12', 13', 14', 15', 15' 10', 18' and 20'. To select your track length, choose the “Track Length” option, which is found below the price on the product page.
Q: Are the hardware kits available in any other finishes than just Flat Black?
A: No, the hardware kits listed on the website are only available in a Flat Black finish. However, we can do custom bypass kits through a different manufacturer. If you would like a quote, give us a call at 1-800-997-5085 or send us an email at email@example.com.
Q: The pre-drilled spacer holes on the track don’t match the studs in my wall. What can I do?
A: Often times the studs in your wall won’t be aligned with your doorway in such a way that your studs line up with the hardware kit track. In this case, you will want to mount a header board to the studs above the doorway and then mount the hardware to the header board. This will increase the stability of your barn door hardware installation and allow you to mount your hardware kit anywhere along the header board.
Q: Can I cut the track (rail)?
A: Yes, as mentioned above you can cut the track down to the size you need without having it compromise the integrity of the track. You can use any saw that is designed to cut steel, including a hacksaw or reciprocating saw. Then soften the edges with a circular grinder or metal file. Finish the edges with a course grit sand paper. Most black spray paint can be to touch up the cut end as it won't be noticeable. For a more exact match, bring the cut-off end of the track to a paint store and have them to a color match.
Q: Does the hardware kit contain all of the parts I will require to mount my barn doors?
A: Yes, the only things you will need to provide are the doors and any handles for the doors. All of the other components required to hang your doors are included in the hardware kit.
Q: I lost my copy of the installation instructions. Can I download another copy from your website?
Q: When will my hardware kit be delivered?
A: Orders are generally processed and shipped within 2 business days of the order date. Courier delivery typically takes 3-4 business days, depending on which region they are being shipped to.
Q: Do you ship internationally?
A: No, unfortunately we only ship to the continental USA. We do ship to freight forwarding addresses, so you could use a freight forwarding company to ship your hardware kit internationally.
Q: Where are the hardware kits shipped from?
A: Atlanta, Georgia.
Q: What is the difference between each style of the Single/Double Barn Door Hardware kits?
A: All of the other hardware kits are the same. The only difference is the hanger style, so if you are undecided, choose your hardware kit based on the hanger style you like best.
Q: How much clearance is required above the doorway?
A: The Horseshoe hardware kit requires 4-3/8” of clearance and the Low Profile hardware kit requires 4-5/8” of clearance. All of the others require between 5” – 6” of clearance. Please call us at 1-800-997-5085 or send us an email at firstname.lastname@example.org for specifications.
Q: Do you sell a bypass barn door hardware kits?
A: Yes, you can browse our selection of bypass barn door hardware kits HERE
Q: Which soft close mechanism on your website is compatible with this hardware kit?
A: The compatible soft close mechanism is simply called “Barn Door Soft Close” on our website and it can be found HERE.
Once your order is placed, you will be sent a confirmation email. We have received your order in our system and pre-authorized your credit card. We immediately reach out to our suppliers and confirm that the product is available for shipment and in-stock. If it is on backorder or unavailable, we will void the pre-authorization and contact you via email. If your item(s) are available for shipment (or being custom made) we will process the charges and submit the order for shipment.
Stock orders will be processed and shipped within 5 business days of the date the order is placed (often sooner). You will receive the tracking information by email within 24 hours from the time your order leaves the warehouse. If you don’t receive tracking information within 6 business days, feel free to follow up at email@example.com.
Damages or Missing Components
Inspect your item(s) for damage when they arrive and make note of it when signing for delivery. If they do arrive damaged, send photos of the damage to firstname.lastname@example.org and we will process an insurance claim on your behalf. Once you have received your product, take an inventory and make sure it matches the component list in the installation instructions. In the rare case that you are missing any components, send an email to email@example.com and we will ensure that you are shipped the right parts.
Cancellations and Refunds
All orders cancelled after 48 hours are subject to a $20 administration fee, regardless of whether the order was shipped. If the order has been shipped, the buyer is responsible for actual return shipping charges. Refunds are only issued to the original credit card that was used to place the order. If the order was shipped, shipping charges are not refundable.
All request for returns must be sent to firstname.lastname@example.org. Please include your order number and the reason for your return. If the return meets the criteria, we will send you further instructions on how to proceed with the return. The return policy varies based on the supplier as different suppliers have different terms:
Hardware and Accessories: All standard barn door hardware kits (single, double and bypass) and hardware accessories are eligible for returns for 30 days from the date the product was delivered to the customer. All components must be unused in their original purchased condition. Custom orders and returns requested after the 30 days will be decided on a case-by-case basis at the discretion of Rustic Rolling Doors.
Barn Doors: All of our barn doors are custom made to order, so they are not eligible for returns. Please double check your measurements before placing an order.